Welcome to Trident Products

Mill Duty Hydraulic Cylinders as Per ISO 6020/1 and 6022

HYDRAULIC CYLINDERS – SERIES ZAS
MODULAR FLANGED END CAPS CONSTRUCTION (MILL DUTY)
MAX. WORKING PRESSURE:250 BAR. TEMP. RANGE: - 20 TO +80 C
SPEED: UPTO 0.5 METER/SEC. VISCOSITY: 2.8 TO 380 mm2/SEC
MEDIUM : Mineral Oil To DIN 51 524, CLEANLINESS: NAS1638 CLASS 9
HL- HLP & HFA FLUIDS

All standard mountings available
Bore & Piston Rod as per DIN- ISO 3320 sizes. Cylinders in Bore sizes from 40 mm to 350 mm in Strokes upto 5000mm are available.
Cylinder tube from St 52.0 as per DIN 2391/ 2393 Imported from world’s best producers.
Piston Rod of Ck-45 Hard Chrome Plated & Ground to Surface finish of 0.2 micron Ra or better, Chromium thickness of min. 20 micron on radius, Corrossion Resistance with rating 9 of NSS 100 hrs. rating. These rod rods are sourced from the world’s best producers.
Induction Hardened rods & Stainless Steel rods are available on request.
Sealing system used is from Parker-Pradifa or equally reputed companies in trade.
Low friction sealing system available on order
High temperature sealing system available on order.
Cylinders with sealing system suitable for HFC & HFD fluids are available on order.
Cylinders with water jackets on order
Customised mounting available on order
Cylinders with end position sensor or LVDT available on order
Double ended cylinders on order.